Please use this document as a resource to understand the parameter on your Red Series A19 Bulb (LZW42). We try to keep this up-to-date, but as we constantly change our firmware, there may be a mistake. Please reach out if you see anything that needs to be corrected.

Please see the table below for a quick reference guide to the only parameter on the Red Series A19 Bulb (LZW42). For a full explanation of the parameter, please click on the hyperlink in the cell to be taken down the page to the appropriate section.

Below we'll list out the parameter number, description, range, default value, size, firmware version it was implemented and an example of how to use it.

Power On State refers to how the bulb will behave when power is restored to it (ie: after a power outage).

To change how your Red Series A19 Bulb (LZW42) behaves when power is restored to it after a power outage, please look for Parameter 2 in your hubs user interface. By default this parameter is set to a value of 0, which returns the bulb to the, "On" state, however, you can also have the bulb return to the last state it was in prior to a power outage by selecting a value of 1.