DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.
Current Production Version: 2.31
Current Beta Version: N/A
Development Status: Closed
GitHub Repository: https://github.com/InovelliUSA/Firmware/tree/main/Red-Series/Z-Wave/LZW42-RGBW-Bulb
NOTE: Beta firmware is considered unstable - please update at your own risk
Firmware Changelog
Below is the changelog for the Red Series RGBW A19 Smart Bulb (LZW42).
NOTES:
Rows highlighted in blue are production firmware versions
Parameters that are hyperlinked lead to the official Red Series RGBW A19 Smart Bulb • Parameters page for further explanation.
Each Firmware Version is hyperlinked to the corresponding GitHub folder
In the, "Firmware Version" column, you can find the date code which will tell you what firmware version your switch was produced with. Date codes can be found on the base of the bulb
Firmware Version | Date Released | Enhancements Added | Bug Fixes | Notes |
Production
Date Codes: 0821 | Feb. 25, 2021 | Added the ability to add the bulb in Non-Secure mode |
| Quickly turn the bulb on / off 3 times to put the bulb into NON-SECURE inclusion mode. |
Beta | Jun. 10, 2020 |
| Fixed: Removing Color Reports from unsolicited reporting of group 1 to reduce network traffic. |
|
Production
Date Codes: 1019 | October 2019 |
|
| Initial Release |
Updating Your Firmware
To update your firmware, please click on the hub you have to be taken to specific instructions.
Home Assistant - ZWave JS UI