All Collections
Home Assistant - Zigbee2MQTT
Checking Your Device Firmware Version • Home Assistant (Zigbee2MQTT)
Checking Your Device Firmware Version • Home Assistant (Zigbee2MQTT)

This article will show you how to check your Inovelli smart home device firmware on the Home Assistant (Zigbee2MQTT) platform

Eric Hines avatar
Written by Eric Hines
Updated over a week ago

DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.

Please use the below instructions to find what firmware version your Inovelli Red or Blue Series device is.

  1. Open up your Home Assistant App and click on the, "Settings" tab

  2. Then click on the, “Devices & Services” tab

  3. Click on the, "Devices" tab at the bottom


  4. Your firmware version should be listed under the, "Device Info" as shown in the screenshot below

Did this answer your question?