All Collections
General
Resources
Inovelli
Firmware File Locations & Targets
Firmware File Locations & Targets

This article will direct you to the proper location for the firmware files for your Inovelli device(s) along with the proper target number.

Eric Hines avatar
Written by Eric Hines
Updated over a week ago

DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.

All of our firmware files can be found on our GitHub Repository. However, if you'd like to find the specific location for your device, please use the table below and click on the applicable URL.

Additionally, in some instances, you will need the target number to properly flash the firmware -- this number can be found in the, "Target" column. An example of where the target is needed is shown below:

Inovelli Device Firmware File & Target Table

Name / SKU / Gen

Extension

Target

Notes

SKU: VZM31-SN

.ota

N/A

No target is needed for Zigbee devices.

.ota

N/A

No target is needed for Zigbee devices.

.gbl

0

Please use Target 0 for updating your device.

.otz
.bin

0
1

Please use Target 0 for the .otz file and Target 1 for the .bin file.

Make sure you use the correct .bin with the correct .otz.

SKU: LZW30-SN

.otz

0

Please use Target 0 for updating your device.

.gbl

0

Please use Target 0 for updating your device.

.otz
.bin

0
1

Please use Target 0 for the .otz file and Target 1 for the .bin file.

Make sure you use the correct .bin with the correct .otz.

.otz

0

Please use Target 0 for updating your device.

.otz

0

Please use Target 0 for updating your device.

Please note, we've linked to the NZW31-S files. Feel free to use that firmware.

.otz

0

Please use Target 0 for updating your device.

SKU: NZW31-ST

.otz

0

Please use Target 0 for updating your device.

SKU: NZW30

.otz

0

Please use Target 0 for updating your device.

Please note, we've linked to the NZW30-S files. Feel free to use that firmware.

.otz

0

Please use Target 0 for updating your device.

SKU: NZW30-ST

.otz

0

Please use Target 0 for updating your device.

Did this answer your question?