DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.
Current Production Version: 1.03
Current Beta Version: 1.04
Development Status: Closed
GitHub Repository: https://github.com/InovelliUSA/Firmware/tree/main/Red-Series/Z-Wave/NZW30-S-On-Off-Switch
NOTE: Beta firmware is considered unstable - please update at your own risk
Firmware Changelog
Below is the changelog for the Gen 1 On/Off Switch w/Scenes (NZW30-S).
NOTES:
Rows highlighted in blue are production firmware versions
Parameters that are hyperlinked lead to the official Gen 1 On/Off Switch w/Scenes • Parameters page for further explanation.
Each Firmware Version is hyperlinked to the corresponding GitHub folder
In the, "Firmware Version" column, you can find the date code which will tell you what firmware version your switch was produced with. Date codes can be found on the bottom right of your switch (in the case you have no date code, you have the earliest version of the light switch).
Firmware Version | Date Released | Enhancements Added | Bug Fixes | Notes |
Beta |
| 1x Tap Up/Down Sends Central Scene Report + Turns Light On/Off
|
|
|
1.03 Production
Date Code: 0418 0818
|
| Removed S2 Encryption |
| At the time S2 Encryption was causing issues with various hubs so we removed it |
1.01 Production
Date Code: No Date 0x17 0218
x = number |
|
|
|
|
Updating Your Firmware
To update your firmware, please click on the hub you have to be taken to specific instructions.
Home Assistant - ZWave JS UI