All Collections
Switches & Modules
Gen 1 - Dimmer Toggle Switch w/Scenes
Resources
Gen 1 Dimmer Toggle Switch w/Scenes • Button Combinations & Quick Tap Sequences
Gen 1 Dimmer Toggle Switch w/Scenes • Button Combinations & Quick Tap Sequences

Button combos and quick taps to change settings and parameters locally on your Gen 1 Dimmer Toggle Switch w/Scenes (NZW31-ST)

Eric Hines avatar
Written by Eric Hines
Updated over a week ago

DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.

Button Combinations

The Gen 1 Dimmer Toggle Switch w/Scenes has many different button combinations that indicate what the switch is doing or what settings and parameters are being changed.

Standard Button Combinations are used to either pair/remove your switch

Quick Tap Sequences is a quick and easy way to change the important parameters (ie: change LED status indicator or invert switch).

Standard Button Combinations

Standard Button Combinations for your Gen 1 Dimmer Toggle Switch w/Scenes are used to either pair or remove your switch.

To see the table, click here: Standard Button Combination Table

Pairing & Removing

To include (pair) your Gen 1 Dimmer Toggle Switch w/Scenes (NZW31-S), put your hub in inclusion (pairing) mode and tap on the top of the paddle (on) 6x rapidly. The LED should blink a couple of times quickly and then long blink once if successful.

Quick Tap Sequences

The Gen 1 Dimmer Toggle Switch w/Scenes has various settings and parameters you can change at the switch itself via a sequence of taps at the paddle.

To see the table, click here: Quick Tap Sequences Table

Example: If you'd like to change the LED Indicator status on your Gen 1 Dimmer Toggle Switch w/Scenes, you would tap on the top of the paddle (on) part of the paddle ten (10) times.

Enable/Disable Local Protection Mode

To enable or disable Local Protection Mode on your Gen 1 Dimmer Toggle Switch w/Scenes, first, check the firmware version you have. For firmware version 1.03, tap the bottom of the paddle (off) eight (8) times rapidly. For firmware version 1.04, tap the bottom of the paddle (off) eight (8) times rapidly followed by the top of the paddle (on) two (2) times rapidly. This feature is not available on all other firmware versions.

Each time you go through the sequence via paddle taps, it will enable and then disable local protection mode.

Video Demonstration

Firmware 1.03

Firmware 1.04

Invert Switch

To invert your Gen 1 Dimmer Toggle Switch w/Scenes, tap the bottom of the paddle (off) ten (10) times rapidly. Each time you tap the bottom of the paddle ten times, it will cycle between the way the switch is positioned (ie: inverted or not).

Video Demonstration


Gen 1 Dimmer Button Combination Table

Below you'll find tables for the Standard Button Combinations as well as the Quick Tap Sequences.

Standard Button Combination Table

Desired Outcome

Action

Effect

Notes

Enable Pairing to Network

Enable Removal from Network

Tap the Top of the Paddle (on) 6x Rapidly

Blink

If successful in starting pairing or removal, your switch will blink blue once or twice.

Quick Tap Sequences Table

Here's how you read this chart:

  • Look for the desired outcome you want

  • Follow the Action at your switch

Example: To enable or disable Local Protection Mode on your Gen 1 Dimmer Switch, first, check the firmware version you have. For firmware version 1.03, tap the bottom of the paddle (off) eight (8) times rapidly. For firmware version 1.04, tap the bottom of the paddle (off) eight (8) times rapidly followed by the top of the paddle (on) two (2) times rapidly. This feature is not available on all other firmware versions.

Desired Outcome

Firmware Version

Action

Enable/Disable Local Protection (Disable/Enable Internal Relay)

1.03

Tap the bottom of the paddle (off) 8x rapidly. Each time this is done, it will cycle between enabling and disabling local protection.

Enable/Disable Local Protection (Disable/Enable Internal Relay)

1.04

Tap the bottom of the paddle (off) 8x rapidly followed by the top of the paddle (on) 2x rapidly. Each time this is done, it will cycle between enabling and disabling local protection.

Invert Switch

All

Tap the bottom of the paddle (off) 10x rapidly. Each time this is done, it will cycle between the way the switch is positioned (inverted or not inverted).

Did this answer your question?