DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.
Button Combinations
The Gen 1 On/Off Outdoor Smart Plug w/Scenes (1-Channel) has many different button combinations that indicate what the switch is doing or what settings and parameters are being changed.
Quick Tap Sequences is a quick and easy way to change the important parameters (ie: change LED status indicator or invert switch).
Quick Tap Sequences
The Gen 1 On/Off Outdoor Smart Plug w/Scenes (1-Channel) has various settings and parameters you can change at the switch itself via a sequence of taps at the paddle.
To see the table, click here: Quick Tap Sequences Table
Example: If you'd like to change the LED Indicator status on your Gen 1 On/Off Outdoor Smart Plug w/Scenes (1-Channel), you would hold the On/Off button for 5 seconds.
Change LED Indicator Light Behavior
To change the way the LED Indicator light behaves when turning on/off the smart plug, hold down on the on/off button for 5 seconds. There are two different options:
Smart Plug On = LED Off
Smart Plug On = LED On
Each time you hold down on the on/off button for 5 seconds, it will cycle through the two options above.
Video Demonstration
Video Demonstration
Disable the LED Indicator Light
To disable LED Indicator light on your smart plug, hold down on the on/off button for 10 seconds. Each time you hold down on the on/off button for 10 seconds, it will enable and disable the LED Indicator light.
Video Demonstration
Video Demonstration
Gen 1 On/Off Outdoor Smart Plug Button Combination Table
Below you'll find tables for the Quick Tap Sequences.
Quick Tap Sequences Table
Here's how you read this chart:
Look for the desired outcome you want
Follow the Action at your switch
Example: If you'd like to change the LED Indicator status on your Gen 1 On/Off Outdoor Smart Plug w/Scenes (1-Channel), you would hold the On/Off button for 5 seconds.
Desired Outcome | Firmware Version | Action |
Change LED Indicator Light Behavior | All | Hold down on the on/off button for 5 seconds. Each time this is done, it will cycle between the various LED Indicator Modes. |
Disable LED Indicator Light | All | Hold down on the on/off button for 10 seconds. Each time this is done, it will turn the LED Indicator light on or off. |