Skip to main content

White Series Fan/Light Canopy Module • Firmware Changelog

This article will go through the changelog for the White Series Fan/Light Canopy Module (VTM36)

Written by Kaleb

DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.

Current Production Version: 1.0.0

Current Beta Version: 1.0.1r1 - Beta firmware available upon request

Development Status: Open

NOTE: Beta firmware is considered unstable - please update at your own risk

Firmware Changelog

Below is the changelog for the White Series Fan/Light Canopy Module (VTM36).

NOTES:

  • Rows highlighted in blue are production firmware versions

  • Parameters that are hyperlinked lead to the official White Series Fan/Light Canopy Module • Parameters page for further explanation.

  • In the, "Firmware Version" column, you can find the date code which will tell you what firmware version your switch was produced with. Date codes can be found on the top left of your switch

Firmware

Version

Date

Released

Enhancements Added

Bug Fixes

Notes

1.0.1r1

Beta

June 2, 2026

Remove the Mode Selection Cluster from EP1 and EP2.

Remove the private cluster from EP1.

Add EP20 through EP26 with the Device Type set to Mode Select. These endpoints include the Descriptor Cluster and the Mode Select Cluster. For details, refer to the Mode Select Endpoint List.

Upgrade the protocol stack to Matter 1.5.0.

IMPORTANT: NOTICE

1.0.0

Production

Date Codes:

2505

Initial Release


Did this answer your question?