20 - Switch Type

0: Single Pole

1: Multi-Way with Inovelli Aux Switch

2:Multi-Way with Inovelli Aux Switch

Determines how the switch is installed and whether it is being used in single pole or as part of a multi-way setup.

21 - Smart Bulb Mode

0: Disabled

1: Enabled (Smart Bulb Mode)

Determines whether the switch operates the connected load normally or configured for use with a smart bulb.

When Smart Bulb Mode is enabled, the switch keeps power supplied to the connected smart bulb so the bulb remains available for control through your smart-home system.

22 - Control of Switch Load

0 : Remote & Local Paddle Control

1 : Remote Control Only

2 : Remote Only with Bindings

Determines how the connected load can be controlled. This setting allows you to choose between physical paddle control, remote control, or remote control using bindings.

23 - Dimming Speed

0 : Instant

1 : 500 ms

2 : 800 ms

3 : 1.0 s

4 : 1.5 s

5 : 2.0 s

6 : 2.5 s

7 : 3.0 s

8 : 3.5 s

9 : 4.0 s

10 : 5.0 s

11 : 6.0 s

12 : 7.0 s

13 : 8.0 s

14 : 10.0 s

Controls how quickly the light transitions between brightness levels when dimming. A shorter time creates a faster transition, while a longer time creates a slower, more gradual fade.

24 - Button Delay

0 : No Delay

1 : 300 ms

2 : 400 ms

3 : 500 ms

4 : 600 ms

5 : 700 ms

6 : 800 ms

7 : 900 ms

Sets the amount of time the switch waits before registering a physical paddle press. This can be useful for preventing unintended button presses or allowing time for a specific multi-button interaction.

25 - LED Bar Color

0 : Red

1 : Orange

2 : Yellow / Lemon

3 : Lime

4 : Green

5 : Teal

6 : Cyan

7 : Aqua

8 : Blue

9 : Violet

10 : Magenta

11 : White

Sets the color of the switch LED bar. Use this to customize the appearance of the switch or establish a consistent color scheme for different rooms, devices, or notifications.

26 - LED Effect

0 : Off

1 : Solid

2 : Fast Blink

3 : Slow Blink

4 : Middle Chase

5 : Open / Close

6 : Small to Big

7 : Slow Falling

8 : Middle Falling

9 : Fast Falling

10 : Slow Rising

11 : Middle Rising

12 : Fast Rising

13 : Middle Blink

14 : Slow Chase

15 : Fast Chase

16 : Slow Siren

17 : Fast Siren

Determines how the LED bar behaves when displaying its configured color. In addition to a static LED, several animated effects can be used for visual feedback and notifications.

27 - Switch Mode

0 : On / Off

1 : Leading Edge Dimmer

2 : Trailing Edge Dimmer

Determines how the switch controls the connected load. Select the mode that matches the type of load and desired behavior.

28 - Relay Audible Click

0 : Disabled

1 : Enabled

Controls whether the mechanical relay inside the switch makes an audible click when it changes state.

29 - LED Intensity (When On)

Range : 0 to 100 (Percentage Value)

Sets the brightness of the LED bar when the switch is in the On state.

30 - AUX Test

Values: 105, 115, 125, 135, 145

Provides a test function for checking communication with a connected Inovelli Aux Switch.

Select one of the available test values to send a test command through the auxiliary-switch connection. This can be useful during installation or troubleshooting to verify that the switch and Aux Switch are communicating correctly.

31 - LED Intensity (When Off)

Range : 0 to 100 (Percentage Value)

Sets the brightness of the LED bar when the switch is in the Off state. This setting is independent of the LED brightness used when the switch is on.