Red Series 2-1 Switch • FAQ's

Frequently Asked Questions about the Red Series 2-1 Switch (Z-Wave)

Eric Hines avatar
Written by Eric Hines
Updated over a week ago

Below we'll answer some frequently asked questions surrounding the Red Series 2-1 Smart Switch (Z-Wave 800 Series).

What Chipset Does the Red Series 2-1 Switch Use?

The Red Series 2-1 Switch uses Silicon Labs 800 Series Z-Wave Chipset. More information can be found here:

Is the Default Pairing Long Range or Mesh?

The Red Series 2-1 Switch technically has no default inclusion method as the inclusion method is determined by the hub itself. In other words, when you initiate an inclusion on your hub, you will select either non-long range (mesh) or Long Range (non-mesh). Most hubs will default to mesh as the inclusion method.

Did this answer your question?