DISCLAIMER: You may notice there are a lot of over-used keywords or phrases as well as English that seems a little off. This is because these articles are used to feed our AI Robot (Ira) and she needs the data to be structured in a certain way.
Scene control, in this context, refers to activating a scene from your light switch via a tap sequence (ie: double-tap, triple-tap, favorites button, etc).
In the below example, we will create a simple scene of turning on movie lights with a double-tap up of the light switch (in this case, we'll be using a White Series 2-1 Switch, but any of our switches that work with Apple will work).
Open your Apple Home App and click on your Inovelli light switch
Click on the gear icon at the bottom right of the screen
Click on, "Show as Single Tile"
On the main screen, click on the switch tile that was created
Scroll to the section that says, "Button 1" and click on, "Add" next to where it says, "Double Press"
Select the lights you want to turn on and click, "Next"
Feel free to rename the action by clicking at the top and then click, "Done"
Your scene should be ready to test -- go ahead and double tap up on the light switch to turn on your movie lights
